Divoom blog banner

How One Divoom Times Frame Owner Turned Its Backlight Into a Warm Orange Glow

Written by Divoom Professional Team

Updated on

Thank you to AEther_7 for sharing their Times Frame project and the photo of their finished setup. After about two months with the display, they found themselves noticing the light on the wall behind it whenever the room was dark. They saw a use for that light and turned it into a warm orange glow with a piece of frosted file folder.

Divoom Times Frame backlight
by u/AEther_7 in r/Divoom_Products

A Dark Room Gave Them the Idea

AEther_7 kept their room dark much of the time. In those conditions, the Times Frame lit up part of the wall behind the desk, making the backlight part of the room even when their attention was on the monitor or the clock.

They could cover the glow with the backer that came with their unit, but they were interested in using it as an accent. They wanted a warmer color that would feel at home on the desk in the evening.

That gave them a specific goal. The clock could stay where it was, and the light already reaching the wall could take on a different color. The project centered on a piece that would sit behind the frame and could be swapped later.

Why the Included Backer Didn’t Suit Their Setup

The cover included with AEther_7’s unit gave them another way to handle the light. They found that it kept popping out at the back, which made it awkward to leave in place.

They did notice a benefit from the reflective side. A backing can affect how the picture looks from the front because the screen is partially transparent. The Awesomer’s Times Frame demonstration shows how turning the stock backer changes what is visible through the display.

AEther_7 was after a different effect from the included backer. They wanted the light to reach the wall and took the loose fit as one more reason to try a removable piece of their own.

How a File Folder Became an Orange Backing

AEther_7 cut a piece from a frosted orange file folder to fit the back of the display. They attached the cutout with clear double-sided tape. The translucent material let the existing light through and gave the glow its orange tint.

They described the panel as easy to peel away and said the tape lifted cleanly on their frame. Keeping it removable mattered because it left room to try a different color later.

They also considered adding a tinted layer if they wanted to bring the brightness down further. The photo records the result with the orange sheet. The darker layer was an idea they shared for a later change.

What the Finished Setup Looks Like After Dark

In AEther_7’s photo, the Times Frame sits beside a monitor with a large digital clock on its screen. The wall behind it picks up a yellow-orange glow, with the brightest patch just above the frame.

AEther_7’s Times Frame displaying a digital clock while its orange backlight illuminates the wall
AEther_7’s finished desk setup. The orange backing colors the light on the wall while the clock stays visible from the front. Photo by AEther_7.

The dark clock face and large digits remain easy to see in the photo. The glow falls behind the display, so the wall carries most of the color while the screen still works as a clock beside the monitor.

AEther_7 was happy with the result and described the glow as mood lighting for the room. They shared the finished look as a photo, so it shows the appearance in their setup and leaves the change in brightness unmeasured.

Where the Orange Light Came From

In this setup, the new color came from the orange sheet behind the display. The physical filter changed the light before it reached the wall, while the clock face occupied the front of the frame.

Times Frame also has a side accent light along its edge. The side light can be set to a steady color through the frame’s controls, as shown in The Awesomer’s demonstration. It produces a visible strip beside the screen.

AEther_7 was working with the light that already spilled toward the wall. In the finished setup, the colored backing makes that larger patch of light part of the room’s look while the front of the frame still shows the time.

FAQ About the Project

What did AEther_7 use for the orange backing?

They used a piece cut from a frosted orange file folder and attached it with clear double-sided tape.

Could they remove the backing later?

Yes. AEther_7 described the sheet as removable and said the tape peeled away cleanly on their unit.

Did they test how much dimmer the light got?

They shared a photo of the finished orange glow. Their account describes the color and appearance of the result, with no before-and-after brightness measurements.

Conclusion

AEther_7 started with a bright patch on the wall that kept catching their eye. A piece of frosted orange folder gave that patch a purpose, and the finished setup still had a readable clock where they wanted it.

The Divoom Times Frame in this setup serves as a clock beside the monitor. Its on-device brightness control and adjustable side light give owners a way to adapt the display to a desk they use after dark.

Divoom Times Frame Floating Smart Desk Display Divoom Times Frame — WiFi digital photo frame with floating transparent display, 64GB storage, and 400+ clock faces. €140,00 EUR €186,95 EUR with code BF26FRAME Buy now

Disclaimer: This content is for general information only and is not professional or medical advice, a safety guarantee, or permission to use third-party intellectual property. Follow official product instructions and obtain any required permissions before attempting DIY projects or modifications.

Editor's Recommendation