Divoom team discussing product support

How to Make a Pixel Sprite Face Four Directions From One Base Drawing

Written by Divoom Professional Team

Updated on

Start with one sprite and mark the character's ground point, head height, palette, and any detail that belongs to a particular side of the body. Duplicate the base into four equal cells. Mirror a side view to get a head start on the opposite side. For front and back, redraw what the viewer can see from those directions. Finish by switching among the four images at actual size while the ground point stays fixed.

Choose the view that gives you the most to reuse

Use the view you already have if it communicates the character well. A front view gives you the strongest reference for face, costume and overall width. A side view gives you a useful outline for a second profile. With a three-quarter base, decide whether the whole set will keep that raised camera angle or switch to simpler flat views. A front view seen from above and a side view seen straight on can look like different characters even when the clothes match.

Make a small character note beside the base. Write down the coat length, the hand carrying the lantern, and the direction the light comes from. Use the character's own left and right in these notes. “Left side of the drawing” will mean something different after you turn the character. Record which properties stay fixed, such as a belt color, and which only appear when that surface faces the viewer, such as a back seam.

Lock the anchor and leave enough room for every view

Work in duplicate cells with the same width and height. Mark an anchor where the character meets the ground. On a 24-by-24 cell with one-based coordinates, you might place it on column 12, row 21. Add a line near the head and one across the shoulders if they help. Guides describe a scale, so a brim seen from behind can be slightly different in height without pulling the feet off the ground. Turn the guides off for export.

A lantern, hat or backpack may extend farther in profile than in the front pose. Leave room in all four cells so the longest silhouette fits. If the profile needs a bigger canvas, increase all four cells equally and move their guides by the same amount. Trimming every transparent edge independently can create four different offsets when the target centers each image. Put temporary direction labels outside the sprite or on their own non-exporting layer.

Four upright views of one pixel explorer share a fixed baseline and differ in visible details.

Mirror one profile and repair details that belong to a side

Use a horizontal flip when the visible character is already a profile. Aseprite documents the difference between flipping a selection and flipping the whole sprite. If the page contains four poses, work on the intended cel or copy it to a separate file first. The Rotate documentation covers turning a drawing in the image plane. A quarter turn there rolls the whole figure on the page. Turning the character to show a different side requires changes to its visible surfaces.

Check anything that cannot be mirrored literally. A lantern held in the character's right hand might sit in front of the torso in one profile and be partly hidden by the torso in the other. The shadow under a hood may change shape because you see a different side of the fabric, but a light source fixed at the upper left of the screen still lights from that direction. Move the highlight back to the correct edge. Letters, shield marks and jacket fasteners deserve a separate look. If a detail is too small for both profiles, keep its color or simplify its silhouette where it remains visible.

Build the front and back with different visible surfaces

For the front pose, draw enough of the face, chest or toes to establish the facing direction. For the back, remove facial marks and show the back of the hair, collar or pack. Preserve the overall height and the costume's main colors. Do not add a second face or a copied belt buckle just to fill the same number of pixels. A few clear shapes beat an evenly distributed set of details.

Make the rear pose legible on its own. Hide the direction label, zoom out, and see whether you could tell the back from the front if the two were shown in random order. If the answer depends on a single eye pixel, strengthen a larger clue such as the hat brim, hood opening or foot shape. For a character seen from above, compare the top surface of the head and shoes across all views so the angle stays consistent.

Pay particular attention to hand and shoe pairs in the profile. A two-pixel shift can suggest one leg is stepping forward even if all four frames are supposed to show a resting stance. Try drawing the far shoe in a darker shade and keep its contact height consistent with the viewing angle. Then turn off the layer with the prop and compare the body alone. If the shoulders suddenly seem broader, fix the body before adjusting the lantern. Re-enable the prop and review which hand is in front from that angle. Working on these two layers separately keeps a silhouette change from being hidden by a bright accessory.

Switch directions without changing the sprite's footing

Preview the four cells over the same background, with all four anchors in the same place. Switch one by one and watch the feet before looking at the face. If the feet jump, fix placement. If the feet hold but the lantern appears in the other hand or the character looks shorter, revise the corresponding pose. Aseprite documents exporting frames in a sprite sheet. For a sheet, record the row or column order in plain language. A set of separate files can use the same labels. A guide to working from a sprite sheet for display playback covers a different downstream step once the four cells are ready.

The Pixel Art Maker can hold a small set of editable frames and layers if you want to try the same anchor check in a browser. Save the editable project separately from any preview image. For a small-screen check, display one view at a time. The Divoom Pixoo-64 II is one example of a 64-by-64 grid for an already prepared preview image. A 24-by-24 character can sit inside a target-size canvas while you retain the same anchor and margin between versions. Choose an export and upload method supported by the particular model in the pixel display collection. The device preview helps judge the pose. Keep the editable cells and the direction labels in your source project.

Pantalla LED Divoom Pixoo-64Ⅱ WiFi 64x64 Pixel Art & Contador de redes sociales Divoom Pixoo-64 WiFi pixel art display with 64x64 LED panel. Social media counter, custom animations, clocks, and community art. App controlled frame. €113,00 EUR €146,95 EUR con el código BF26PIXOO64 Buy now

An iMac shows four directional pixel sprite studies beside one lit preview on a Pixoo-64 II.

FAQs About Drawing Four Directions From One Pixel Sprite

Which direction should I draw first?

Start with the strongest existing view. If you are drawing from scratch and the character carries an important prop, begin with the view that explains where it attaches or how it is held.

Do both profiles need the same number of visible pixels?

No. A near arm can hide a shape that is visible from the far side. Keep the body's scale and ground point consistent while allowing those differences.

Where should a ground shadow go?

Keep the ground contact consistent. If the direction of the scene light stays fixed, the shadow should remain on the corresponding side of the ground point as the body turns.

Can I use the front view upside down as the back?

An upside-down sprite changes the head and foot positions on the page. Draw the back with the same upright orientation and substitute rear-facing shapes for front-facing ones.

Do I need walking frames for every direction now?

One standing pose per direction is enough for this check. Get the four silhouettes and anchors working before using them as the keys for a walk cycle.

Conclusion

Preview a front-to-side-to-back turn with the guides hidden. Keep the version in which the feet stay planted, the costume reads as the same character, and the carried object stays on the correct side.

Disclaimer: This content is for general information only and is not professional or medical advice, a safety guarantee, or permission to use third-party intellectual property. Follow official product instructions and obtain any required permissions before attempting DIY projects or modifications.

Editor's Recommendation