Divoom product design sketches

What Is Auracast, and How Is It Different From Bluetooth Pairing?

Written by Divoom Professional Team

Updated on

Auracast is a Bluetooth LE Audio feature that lets a transmitter broadcast audio and lets compatible receivers join the broadcast. A typical Bluetooth speaker setup instead pairs a phone with a particular speaker and sends audio over that connection. When you join an Auracast broadcast, you select the stream you want to hear. You may use a phone to find the stream, but the receiving device can get the audio directly from the transmitter.

Pairing Establishes a Relationship With a Specific Device

When you pair a phone with a speaker, you select that speaker as the other device. The phone may remember the speaker and reconnect on another day. Once the speaker is selected for media playback, the audio goes to that connected endpoint. This is why you usually look for the speaker's name in your phone's device list, then check which output is selected if the music is still coming from the phone.

A familiar example is a host playing a playlist through one speaker at home. The host controls the source, and the speaker renders the audio sent to it. A guest standing beside it doesn't automatically receive the same playlist on their own earbuds. Connecting a second device may be possible with particular phones and accessories, but the setup depends on those devices' sharing or speaker-link features.

A public broadcast solves a different problem. At a community event, several listeners may want the same announcements while using their own compatible receivers. Giving each attendee a place in the organizer's paired-device list would change the setup every time somebody arrived or left. A broadcast gives the attendees a named stream they can choose.

Joining Selects a Stream That Is Already Being Sent

Bluetooth SIG describes a transmitter advertising information about the broadcast while transmitting the audio. A compatible receiver finds the broadcast or is given its details, synchronizes with it, and plays the audio it receives. Other compatible receivers in range can independently select the same stream. The transmitter doesn't have to manage each listener as a separate paired audio endpoint.

A point-to-point Bluetooth playback link compared with one broadcast joined by two receivers

A room can have more than one broadcast. For example, an event might provide separate audio for an introduction and a presentation in another space. Check the listed broadcast name or the event's signage before joining. The phone that helped find the stream and the device that plays it may be different pieces of hardware, so check which receiver the assistant is controlling.

An open stream can be available to receivers that discover it. A protected stream requires the right broadcast code or joining information. The Auracast FAQ on access and encryption describes both options and explains that QR or NFC can help deliver joining details in supported setups. A code protects access to that broadcast. It does not add a receiver to the transmitter's list of individually paired audio devices.

Check the Transmitter, Receiver, and Optional Assistant

First, identify what sends the stream. It may be a venue's broadcast system or a personal device that explicitly offers Auracast transmission. The transmitter has to accept the intended audio source and advertise a broadcast the listeners can select. A setting that only lets a phone listen to a broadcast doesn't establish that it can create one.

Next, identify what plays the audio. Look for Auracast reception in the exact earbuds, headphones, hearing device, speaker, or other equipment you plan to use. A generic Bluetooth logo or version number won't establish that role. The receiver design overview describes the functions needed to select, synchronize with, and render a broadcast. They are capabilities of the receiving product and its software.

Finally, identify how you will choose the stream. An Auracast assistant can find broadcast information and pass the selection to a compatible receiver. In one common arrangement the phone is connected to the receiver for setup and the transmitter sends the listening audio directly to the receiver. Other receivers can discover and select a broadcast without a separate phone. The assistant design guide describes that role and why the control interface and the listening path can be on different devices.

The same physical device can fill different roles in different situations. A phone could be a transmitter at home and an assistant at a venue, if its implementation supports both. Check the feature descriptions separately. If you want to share the audio from the phone itself, look for a setting that starts a broadcast. If you want to hear a broadcast from a different source, find the discovery and join controls for your receiver instead.

Plan for how the listener will switch streams too. A phone that helps select the stream can make several nearby names easy to compare. A receiver with only a button may cycle through choices differently. At a venue, confirm the intended stream and listen briefly before the announcement begins. If the audio is intended for a particular room, check again after moving to another area because coverage depends on the installation.

A familiar Bluetooth control menu can contain both paired devices and broadcast choices. Read the action next to the name. A prompt to pair with a new accessory is establishing a device relationship. A prompt to join a broadcast is selecting available audio. Knowing which action you are taking makes it easier to leave and rejoin the same stream later.

Confirm the Roles Before Relying on a Setup

If you're going to an event, start with the venue's instructions. Find the stream name and whether it is open or protected. Then read the receiver's instructions for joining. If a phone is involved, check whether it can act as an assistant for that receiver and whether the operating system or companion app offers the relevant menu. A venue QR code can supply joining information. It cannot add reception to hardware that lacks it.

If the stream appears in a list but you can't hear it, confirm that the assistant has passed the selection to the right receiver and that the receiver can actually join. Check range and the code if required. A compatible phone's ability to show a broadcast name is only one part of the setup. For a personal broadcast, check the transmitting role as well. Receiving support alone won't make the phone or accessory an audio source for other listeners.

White Ditoo-Pro showing a lit mint pixel face beside a phone and earbud case at a check-in counter

The Divoom Ditoo-Pro is documented as a conventional Bluetooth speaker. The product and manual reviewed for this article don't establish Auracast reception or transmission on that model. Its ordinary playback workflow is a practical point of comparison when you are evaluating Bluetooth speakers. A feature that uses two speakers for stereo playback from one source is also a different thing to check. One feature describes a listening arrangement, while Auracast reception describes how the audio arrives.

Ditoo-Pro Retro Pixel Art Bluetooth Speaker Shop Divoom Ditoo-Pro retro pixel art Bluetooth speaker with 15W sound, vivid pixel display, DIY app control, alarm, white noise, and USB-C playback. €63,00 EUR €92,95 EUR con il codice BF26DITOO Buy now

FAQs About Auracast and Bluetooth Pairing

Do I have to pair my headphones with the venue's transmitter?

You select its broadcast on a compatible receiver or assistant. You may still pair your phone with your own receiver so the phone can help you choose the stream.

Does any device with Bluetooth LE Audio support Auracast?

Check the exact model's advertised capabilities. A product can implement some LE Audio functions without documenting the transmitter, receiver, or assistant role you need.

Can a phone find the broadcast without playing the audio itself?

Yes, when it serves as an assistant for a compatible receiver. The receiver can render audio directly from the transmitter after it gets the joining details.

Can I join without a phone?

A receiver with its own broadcast discovery and selection controls can join without a separate phone. Use the controls described for that receiver.

Can two people listen to the same broadcast at different volumes?

If each has a separate compatible receiver with its own volume control, each can set a listening level. Adjusting the receiver doesn't set the transmitter's level for everyone.

Conclusion

Pairing sets up a relationship between particular devices. Auracast lets a compatible receiver select an available broadcast. Check what sends the audio, what receives it, and how you will make the selection. Those three checks tell you whether a specific setup can work before you depend on it.

Disclaimer: This content is for general information only and is not professional or medical advice, a safety guarantee, or permission to use third-party intellectual property. Follow official product instructions and obtain any required permissions before attempting DIY projects or modifications.

Editor's Recommendation