Divoom blog banner

How a Ditoo Plus Owner Turned Its Pixel Screen Into a Live Webcam Display

Written by Divoom Professional Team

Updated on

Thank you to B33GULL for sharing their Ditoo Plus project and recording the demo. They showed how the little screen could display a live webcam feed and how the arrow keys and lever could control a program on their PC.

A hand turns a Rubik’s Cube in front of a webcam. On the desk, a Divoom Ditoo Plus shows the same motion as a picture only 16 pixels wide. In u/B33GULL’s Ditoo Plus webcam demo, a Windows PC sends the camera frames to the speaker’s screen over Bluetooth. The same build reads the speaker’s arrow keys and lever as inputs for a custom PC program.

The clip shows the cube in the builder’s hand, the camera preview on the computer monitor, and the pixel image on the Ditoo Plus. Watch how the larger color changes survive the jump from camera footage to a 16×16 grid.

Ditoo Plus webcam and Bluetooth controls demo
by u/B33GULL in r/Divoom

What the Rubik’s Cube Demo Shows

The clip puts the subject and its pixel-sized image in the same shot. You can watch the cube turn in the foreground and look across to see how that movement translates to the Ditoo Plus. The cube’s outline and broad color patches are easier to read than the edges between neighboring stickers.

That makes a cube a useful test subject. If a camera crop includes the whole desk, the object gets only a few pixels and can disappear into the background. When the object fills more of the frame, the change from one face of the cube to the next has room to register.

Original demo frame showing a webcam above a monitor, a Ditoo Plus displaying the pixelated feed, and a hand holding a Rubik’s Cube
At about 0:01, the desktop monitor shows the webcam preview and its pixelated version. The Ditoo Plus displays the reduced image below. Video frame by u/B33GULL, r/Divoom.

The practical lesson is to pick a single visual cue for a screen this size. A hand crossing the frame or a bright object turning is easy to follow. A wide shot with two people, a busy background, and small movements asks the same square grid to carry several kinds of information at once.

How the Webcam Feed Reaches the Ditoo Plus

An external webcam captures the scene. The builder’s PC software takes the incoming image, crops it and scales it down to 16×16. It then sends the reduced frames over Bluetooth to the Ditoo Plus, which displays them as they arrive.

Think of the display as the endpoint of a local video feed. The PC controls the camera and the framing, so changing the crop on the computer changes what fits on the small screen. This setup keeps the process on the desk, from the webcam through the computer to the speaker. Broadcasting to an online audience would be a separate task.

A useful way to judge a crop is to check it at the size you’ll actually see. Start with one subject in the center and leave just enough margin for it to move. Stepping back from the display tells you more about whether the motion reads from your chair than zooming in on the PC preview.

What the Reported Frame Rate Measures

The author reported about 16–18 frames per second in the original post. The OpenDitoo demo notes report about 16.4 frames per second in sustained Bluetooth transfer. That figure counts frames the device acknowledged receiving.

The timing observed on the LEDs is a separate measurement. A transfer count can show that frames are reaching the device steadily. Measuring the panel would require observing how many distinct images it actually shows per second. The project’s notes leave that figure open.

If you’re judging the clip for your own use, watch what happens when the hand moves quickly and when it pauses. A readable pause and a clear change in shape can matter more on a 16×16 display than a transfer figure on its own.

How the Arrow Keys and Lever Become Inputs

The project also uses three physical controls on the Ditoo Plus. The left and right arrows send Bluetooth media commands commonly associated with previous and next. A short pull on the lever provides a play or pause command. The builder’s PC software interprets those events in the context of its current screen.

The author demonstrated moving between menu pages and reported using the same controls in a simple game. In a menu, the arrows give you a predictable way to move in either direction. The lever can act on the screen you’re looking at. The PC runs the interaction and sends back the next image.

Three controls suit a small interface. If you imagine a desk status display inspired by the project, the arrows could cycle through a few large icons and the lever could confirm a selection. Keeping each view to one clear symbol gives the screen enough room to show the result of a press.

Try the Same Pixel Look With a Short Animation

For a simple project inspired by the video, record a short clip of one object, such as a hand waving or a toy turning against a plain background. Pick a moment with an easy-to-recognize silhouette. Let it fill most of the square while leaving room for the movement.

Use the first and last frames to check whether the motion loops cleanly. If it’s hard to see what changed at actual size, tighten the crop or simplify the background. A short loop that reads immediately is a better starting point than a longer clip with details the display can barely show.

Once the result reads on a small grid, export it as a GIF and follow Divoom’s guide to importing pixel animations on a compatible display. The GIF gives you a repeatable loop. The original live feed uses the creator’s custom PC software and camera.

FAQ From the Reddit Discussion

How did the builder get the arrows and lever to work?

The builder explained in the comments that the controls already sent Bluetooth media events on the tested unit. The PC program assigned them new actions, such as moving between views. The arrows and lever served as inputs to the project running on the PC.

Did the Ditoo Plus need new firmware to run the demo?

According to the builder, the webcam, menu, and game demos ran without modifying the hardware or flashing new firmware. The PC handled the application. The Ditoo Plus received its pixel frames and returned button events.

Can I enable this through the Divoom app?

The author shared the project as a research preview for a tested Ditoo Plus and Windows setup. The official app guide covers supported tasks such as loading a GIF. Compatibility across different Ditoo models and revisions would need its own testing.

Conclusion

The Ditoo Plus demo shows how much a 16×16 screen can communicate when the subject is clear and the controls are simple. To try the visual idea on your own desk, start with a clip of one object and see if the motion is recognizable when you shrink it to the size of your display.

If you’re setting up a small screen for that looping artwork, the Ditoo-Pro has a 16×16 display that can show GIFs imported through the Divoom app. Put it close to the camera in a desk shot, preview the framing and use a bold loop that viewers can pick out at a glance. This recommendation is for app-based pixel animation.

Ditoo-Pro Retro Pixel Art Bluetooth Speaker Shop Divoom Ditoo-Pro retro pixel art Bluetooth speaker with 15W sound, vivid pixel display, DIY app control, alarm, white noise, and USB-C playback. $67.99 USD $99.99 USD com o código BF26DITOO Buy now

Disclaimer: This content is for general information only and is not professional or medical advice, a safety guarantee, or permission to use third-party intellectual property. Follow official product instructions and obtain any required permissions before attempting DIY projects or modifications.

Editor's Recommendation