Divoom team discussing product support

Pixel Display Shows Half an Image: Causes and Fixes

Written by Divoom Professional Team

Updated on

Make a native-size test image with different markers on the left and right. Reopen the exported file, check the upload preview if one is available, then look at the physical display. If half the image is missing before it reaches the display, check the canvas, crop or assigned region. If the same physical side stays blank in several independent modes, leave the hardware closed and report the comparison to the maker.

Create an image that makes the missing half obvious

Find your panel’s documented pixel dimensions and orientation. Open a fresh canvas at that size. Use a dark background and put one large square on the left and two smaller squares on the right. Add small markers near both outside edges and a center guide so you can tell whether the image shifted or stopped at a boundary. Give the two sides different colors as well as different shapes. A left and right color alone can be hard to compare if the display changes the apparent hue.

Export the first pattern as a single still using a format your model accepts. Save a second copy with the left and right groups swapped. Do not just mirror a symmetric design. In the second version, you want the large square and two small squares to trade places clearly. Keep both versions at the same dimensions and give them names that make it easy to tell which one you sent. Avoid using an animation for the first test, since a frame change can hide which half you are seeing.

Reopen the file before sending it to the display

Open the original and the exported copy as separate documents. Check the actual pixel dimensions and look for all the markers. A preview that fills the editor window may show only the visible view of a larger image, while the export can use the canvas or a selected region. Aseprite’s canvas documentation shows how canvas boundaries can be changed separately from the content. Its sprite-size instructions describe the separate size operation. If you resized the art, confirm that both groups are still present on the final grid.

Swap left and right markers and check where the image first loses a region.

If the reopened file already lacks a marker, fix the canvas position or crop before uploading again. Check whether an image layer is offset and whether transparent areas hide parts of the composition. For example, a complete icon can be present on a layer but sit partly outside the export canvas. A dark or transparent half can also look like a failed panel. Use the opaque test pattern first so that no part of the result depends on transparency or on what is behind the artwork.

Send one file at a time and wait for the display to finish loading it. If the device cycles through older images, choose an identifiable test image and verify the markers you can see belong to the file you just sent. An old image with a dark edge can look like an incomplete upload. When the same old pattern appears twice, check the selected slot or playlist before editing the source file. Keep the same brightness for both patterns so a faint but working side is easier to compare.

Check whether the app or display mode shows only a region

Send the verified still through the model’s supported route. Compare the file with the upload preview or device selection if the app provides one. Check that the target is the intended display and that no template, window, crop, scroll mode or region applies to only one side. If the model allows a split layout, choose a full-screen image slot for this comparison. If no split mode is documented, do not look for a hidden menu or change unrelated settings.

Check whether the image covers only half because it is smaller than the full canvas, rather than because half of a full-size file disappeared. The edge markers help. A full composition contained in one side suggests a different scale, region or viewport. A hard cut through a marker suggests a clip boundary. If changing fit or region affects which marks appear, recheck the full-screen path before drawing conclusions about hardware. Review the editor-to-display comparison if the export is complete but the app or physical panel renders it differently.

Compare the swapped image and one independent mode

Display the second pattern and note whether the missing area follows the large square or stays on the same physical side. If the missing part follows the content, inspect the file and upload route again. If the same side stays blank, try a separate built-in image or full-width display mode that does not reuse the uploaded file, if your model provides one. The goal is to change the source while watching the same physical area. A built-in picture test is a related diagnostic on some other screens. Samsung.

If the same section stays blank across a verified full-width pattern and a separate on-device mode, record it for support. You have narrowed the problem to something common to those display paths. It could involve the device, its configuration or its firmware, so the test alone does not identify a failed component. Do not open the panel or press on its surface. A picture showing both patterns and the independent mode is more useful than a report that half the image disappeared.

If your manual describes a normal restart, run the same two stills before and after it without changing the file. A restart that restores the full pattern gives support useful evidence about the conditions of the problem. If the cutoff returns after a particular app action or display mode, record that step. Leave reset or firmware recovery until the manufacturer recommends it for the exact model, since those steps may affect stored artwork or settings.

Use the model’s native grid and show support the exact result

On the Divoom Pixoo-64 II, start with a 64-by-64 pattern as described in the Pixoo-64 user manual. Confirm both halves in the reopened export before using the model’s supported upload path. Compare that pattern with a documented full-screen image or built-in mode where available. If you use a different panel size, identify the model through the Divoom pixel display collection before drawing the test grid.

Divoom Pixoo-64Ⅱ WiFi 64x64 ピクセル アート LED ディスプレイ & ソーシャル メディア カウンター Divoom Pixoo-64 WiFi pixel art display with 64x64 LED panel. Social media counter, custom animations, clocks, and community art. App controlled frame. $113.99 USD $149.99 USD コード適用 BF26PIXOO64 Buy now

Pixoo-64 II and an iMac showing a cyan square and two amber markers, with white keyboard and mouse

Keep the exported test files, the exact mode names and a photo of the affected side. If the app shows both groups but the physical panel does not, include that difference in your report. Note whether the cutoff is always at the center or moves with the picture. This gives support a reproducible starting point without relying on a reset or a speculative hardware diagnosis.

FAQs About Pixel Displays Showing Half an Image

Why does only one side appear even though the editor shows the whole picture?

The editor can show content outside the exported canvas or a different view of the file. Reopen the export and check whether the same marks are present before examining the upload.

What if the visible half changes when I swap the markers?

Check whether the missing part follows the content or the physical side. A result that follows the file points back toward layout, transparency, cropping or the upload route.

Can a built-in clock help isolate the problem?

Yes, if it actually uses both parts of the display and runs independently of the uploaded file. A clock that only occupies the center is a weak test of the outside columns.

Why does a small image appear entirely on one side?

Check native size, placement and the selected display region. The whole image can be present in a smaller viewport. A native-size pattern with edge markers makes that difference easier to see.

When should I contact support?

Contact support if the same physical area stays blank with verified native-size images and an independent full-screen mode, or if the problem is accompanied by physical damage or unexpected heat. Send the test pattern and the model details.

Conclusion

Compare the left and right markers in the reopened file, in the upload path and on the panel. Swap the markers and try an independent mode. If the blank area stays on the same physical side, give support those results and keep the panel closed.

Disclaimer: This content is for general information only and is not professional or medical advice, a safety guarantee, or permission to use third-party intellectual property. Follow official product instructions and obtain any required permissions before attempting DIY projects or modifications.

Editor's Recommendation